1 | A tailored pulsed substrate bias voltage deposited (aC: Nb) thin-film coating on GTD-450 stainless steel: Enhancing mechanical and corrosion protection characteristics | S Khamseh- E Alibakhshi- B Ramezanzadeh- MG Sari | Chemical Engineering Journal | 2021-01-01 |
2 | Epoxy composite coating corrosion protection properties reinforcement through the addition of hydroxyl-terminated hyperbranched polyamide non-covalently assembled graphene oxide platforms | Morteza Ganjaee Sari-Bahram Ramezanzadeh | Construction and Building Materials | 2020/02/17 |
3 | Polyester-amide hyperbranched polymer as an interfacial modifier for graphene oxide nanosheets: Mechanistic approach in an epoxy nanocomposite coating | Layaa Ghazi Moradi- Morteza Ganjaee Sari- Bahram Ramezanzadeh | Progress in Organic Coatings | 2020-5-1 |
4 | Developing a Graphite like Carbon: Niobium thin film on GTD-450 stainless steel substrate | Sara Khamseh- Eiman Alibakhshi- Bahram Ramezanzadeh- Morteza Ganjaee Sari- Alireza Kazemi Nezhad | Applied Surface Science | 2020-5-1 |
5 | Nanoclay dispersion and colloidal stability improvement in phenol novolac epoxy composite via graphene oxide for the achievement of superior corrosion protection performance | Morteza Ganjaee Sari, Mina Abdolmaleki, Mehran Rostami, Bahram Ramezanzadeh | Corrosion Science | 2020-09-06 |
6 | Graphene oxide nanoflakes as an efficient dispersing agent for nanoclay lamellae in an epoxy-phenolic nanocomposite coating: Mechanistic approach | Mina Abdolmaleki, Morteza Ganjaee Sari, MehranRostami, Bahram Ramezanzadeh | Composites Science and Technology | 2019/11/10 |
7 | The chemical treatment of the AZ31-Magnesium alloy surface by a high-performance corrosion protective praseodymium (III)-based film | Mahsa Saket- Reza Amini- Pooneh Kardar- Morteza Ganjaee | Materials Chemistry and Physics | 2021-02-15 |
8 | Aminosilane-co-Graphene Oxide/Epoxy nanocomposite coating: An approach towards toughness and viscoelastic properties enhancement | Maryam Lotfi- Alireza Azizi- Hossein Yari- Morteza Ganjaee Sari | Progress in Organic Coatings | 2021-02-01 |
9 | Corrosion resistance of epoxy coating on mild steel through polyamidoamine dendrimer-covalently functionalized graphene oxide nanosheets | Mohammad Ramezanzadeh-Bahram Ramezanzadeh-Morteza Ganjaee Sari-Mohammad Reza Saeb | Journal of Industrial and Engineering Chemistry | 2020/02/25 |
10 | Properties and semicrystalline structure evolution of polypropylene/montmorillonite nanocomposites under mechanical load | Norbert Stribeck, Ahmad Zeinolebadi, Morteza Ganjaee Sari, Stephan Botta, Katja Jankova, Søren Hvilsted, Aleksey Drozdov, Rasmus Klitkou, Catalina-Gabriela Potarniche, Jesper deClaville Christiansen, Valentina Ermini | Macromolecules | 2011/12/20 |
11 | Fabricating an epoxy composite coating with enhanced corrosion resistance through impregnation of functionalized graphene oxide-co-montmorillonite Nanoplatelet | Morteza Ganjaee Sari, Mohammadreza Shamshiri, Bahram Ramezanzadeh | Corrosion Science | 2017/12/1 |
12 | Influence of nanoclay particles modification by polyester-amide hyperbranched polymer on the corrosion protective performance of the epoxy nanocomposite | M Ganjaee Sari, Bahram Ramezanzadeh, Mohammad Shahbazi, Amir Saeid Pakdel | Corrosion Science | 2015/3/1 |
13 | Correlation of nanostructural parameters and macromechanical behaviour of hyperbranched‐modified polypropylene using time‐resolved small‐angle X‐ray scattering measurements | Morteza Ganjaee Sari, Norbert Stribeck, Siamak Moradian, Ahmad Zeinolebadi, Saeed Bastani, Stephan Botta | Polymer International | 2013/7/1 |
14 | Dynamic mechanical behavior and nanostructure morphology of hyperbranched‐modified polypropylene blends | Morteza Ganjaee Sari, Norbert Stribeck, Siamak Moradian, Ahmad Zeinolebadi, Saeed Bastani, Stephan Botta, Ehsan Bakhshandeh | Polymer International | 2014/2/1 |
15 | Nanostructure evolution mechanisms during slow load‐cycling of oriented HDPE/PA microfibrillar blends as a function of composition | Ahmad Zeinolebadi, Norbert Stribeck, Morteza Ganjaee‐Sari, Nadya Dencheva, Zlatan Denchev, Stephan Botta | Macromolecular Materials and Engineering | 2012/11/01 |
16 | Structure and Mechanical Properties of an Injection‐Molded Thermoplastic Polyurethane as a Function of Melt Temperature | Norbert Stribeck, Ahmad Zeinolebadi, Morteza Ganjaee Sari, Achim Frick, Marzena Mikoszek, Stephan Botta | Macromolecular Chemistry and Physics | 2011/10/17 |
17 | SAXS investigation of structure–property relationship of polypropylene/montmorillonite composites during load cycling | Ahmad Zeinolebadi, Norbert Stribeck, Zina Vuluga, Christoph Schloen, Stephan Botta, Morteza Ganjaee Sari | Polymers for Advanced Technologies | 2013/8/1 |
18 | Studying the effect of hyperbranched polymer modification on the kinetics of curing reactions and physical/mechanical properties of UV-curable coatings | Farbod Mirshahi, Saeed Bastani, Morteza Ganjaee Sari | Progress in Organic Coatings | 2016/1/1 |
19 | Developing a Novel Hyperbranched Polymer-Modified PP/Clay Nanocomposite: Characteristics Investigation | Morteza Ganjaee Sari, Mohammad Shahbazi, Amir Saeid Pakdel | Polymer-Plastics Technology and Engineering | 2014/10/30 |
20 | Designing a multi-functionalized clay lamellar-co-graphene oxide nanosheet system: An inventive approach to enhance mechanical characteristics of the corresponding epoxy-based nanocomposite coating | B Ramezanzadeh, M Shamshiri, M Ganjaee Sari | Progress in Organic Coatings | 2018/3/1 |